Mounting a TV on the wall allows you to optimize space, protect the equipment from accidental damage, and create comfortable viewing conditions. However, improper installation can result in the expensive panel falling or discomfort during use. In this article, we will find out how to hang a TV on the wall so that it is convenient, safe, and looks harmonious in the interior.
What should be the height of the TV installation on the wall
It is best to position the center of the screen at the viewer’s eye level when seated — this reduces the strain on the cervical spine and the visual apparatus.
Recommended height for mounting a TV on the wall for different rooms:
- Living room: 100-120 cm from the floor to the center of the screen when viewing from a sofa or armchair.
- Bedroom: 120-140 cm if watching while lying down or sitting up in bed.
- Kitchen: 140-170 cm, as viewing takes place while standing during cooking.
- Children’s room: 80-100 cm, taking into account the child’s height.
It is worth thinking about the height of the TV installation in advance and providing for a downward tilt. For TVs in the corner of a room or with multiple viewing areas, swivel models with a horizontal angle of up to 180° are optimal, and a vertical tilt of up to -15° will ensure comfort even when mounted high.
Tips on how to mount the bracket on the wall
Before hanging the TV on the wall, you need to prepare the equipment and check the strength of the base. High-quality installation depends on the accuracy of the markings and compliance with the drilling technology.
Required tools and materials
Be sure to check the contents of the kit before starting installation. For installation, you will need:
- a hammer drill or impact drill with 8-12 mm diameter drill bits;
- a spirit level at least 60 cm long;
- a tape measure and pencil for marking;
- screwdrivers or a screwdriver with bits;
- a hammer for driving in dowels;
- a hidden wiring detector;
- anchor bolts or dowels of the appropriate size.
Marking and drilling holes: how to hang a TV bracket correctly?
- Place the mounting plate of the bracket against the wall at the selected height and mark the center point.
- Mark all mounting points with a pencil according to the holes on the plate.
- Start drilling at low speed, gradually increasing the speed. The depth of the hole should exceed the length of the dowel by 10-15 mm.
- Insert the dowels so that they are flush with the wall or protrude by a maximum of 1 mm.
- Make sure that the fasteners are securely fixed, and only then screw the bracket to the wall.
Features of installation on different types of walls
How to properly hang a TV on the wall based on the material:
- Concrete and brick walls. Use anchor bolts with a diameter of 8-10 mm for panels up to 30 kg and 10-12 mm for heavier models.
- How to fix the bracket to drywall. The optimal solution is to attach it directly to the metal frame profile. Find the vertical studs with a magnetic detector and secure the bracket with 35-45 mm metal screws. Important: only TVs weighing up to 20 kg can be hung on plasterboard without reinforcement.
- Wooden walls. Fasten with 6-8 mm diameter and 70-100 mm long self-tapping screws without using dowels first.
- Aerated concrete and foam blocks. Use nylon dowels with an increased diameter (12-14 mm) or spiral anchors for aerated concrete.
After installing the mounting plate, check the strength of each mounting point by gently pulling it toward you with force.
How to mount a TV on a bracket: important details
What is the best way to hang a TV on the wall after installing the rails? Before hanging the TV on the bracket, check that all points are securely tightened.
To mount the TV on the bracket:
- Find the VESA standard threaded holes on the back panel.
- Take the mounting brackets or adapters from the bracket kit and attach them to the mounting points.
- Tighten the bolts or screws, tightening them crosswise for even fit.
Tips on how to hide wires under your TV
When installing, make sure you have enough cable length, taking into account the maximum extension of the structure. Ways to conceal cables:
- Cable channels: plastic boxes of various sizes and colors are attached to the wall from the TV to the outlet or cabinet.
- Hidden wiring in the wall: cutting grooves for wires and then filling them in is a laborious but highly aesthetic option.
- Decorative overlays: special panels or moldings that simultaneously hide wires and serve as an interior design element.
- Furniture concealment: if there is a cabinet or console under the TV, run the cables along the back wall of the furniture.
Now you know how to mount a TV on the wall. The main thing is accurate marking, the right choice of fasteners for the type of wall, and careful hanging of the panel. Take your time and check the reliability of each step.
